Three-axis-linkage turning-milling composite machine

Features:
The machine frame features a proven,rigid 45°integral slant bed construction casted by premium resin sand cast-iron to ensure maximum rigidity and easy chip removal.
Adopt Germany-FAG/Japan-NSK P4 level imported high precision spindle special bearings to ensure optimum turning results,even at high axial and radial loads.
High-performance preloaded ball screws are quipped with precision bearings to ensure sustained,smooth,vibration-free operation.
An automatic lubrication system maintains optimum tool temperature for long tool life,reduces the operator’s workload and simplifies maintenance.
The workspace is enclosed on all sides with easy access through a large sliding door for set-up,tooling and unloading.
Y axis and 8-station tool turret with driven tools expand the performance spectrum by allowing cost-effective complete machining of complex parts.
Fixed high-speed end face or side face driven tool with power motor can allow for the production of complex parts.
Item | Unit | PT46(C-X) | PT52 (C-X) | PT56 (C-X) |
Max. swing dia. over bed | mm | 380 | 380 | 380 |
Max. swing dia. over slide | mm | 110 | 110 | 110 |
Max.cutting dia. for disc parts | mm | 360 | 360 | 360 |
Max.cutting dia. for axle parts | mm | 250 | 250 | 250 |
Max. cutting length | mm | 250 | 250 | 250 |
Travel | X axis travel | mm | 950 | 950 | 950 |
Z axis travel | mm | 400 | 400 | 400 |
spindle | Spindle end type | / | A2-5 | A2-6 | A2-6 |
Spindle bore | mm | 56 | 62 | 66 |
Max. bar through dia. | mm | 46 | 52 | 56 |
Spindle motor power | Kw | 5.5 | 5.5 | 5.5 |
max. Spindle speed | r/min | 5000 | 4000 | 4000 |
Spindle Bearings | / | Germany-FAG/Japan-NSK |
Feed | Repeat positioning accuracy(X/Z) | mm | 0.005 |
X/Z axis rapid feed | m/min | 30 |
X/Z axis ball screw | / | Taiwan-PMI/HIWIN C3 level |
X/Z axis guideway | / | Taiwan-PMI/HIWIN P level |
X/Z axis ball screw bearing | / | Japan |
X/Z axis motor&driver | / | Japan-YASKAWA/FANUC |
Tool post | Tool post type | / | Driven tool+Gang tool |
Max.Tool qty. | end face driven tool+Gang tool | / | 1 driven tool+6 station gang tool |
Side face driven tool+Gang tool | / | 1 driven tool+8 station gang tool |
End face driven tool+ Side face driven tool+Gang tool | / | 2 driven tools+4 station gang tools |
Others | Brakes | / | Floating brakes |
CNC controller | / | Taiwan-Syntec/LNC Japan-FANUC |
total connected load | KVA | 13.6 | 13.6 | 13.6 |
Dimensions(L*W*H) | mm | 2000×1500×1850 | 2000×1500×1850 | 2000×1500×1850 |
weight | T | 2.7 | 2.8 | 2.8 |
Standard Configuration:
1.coolant system
2.Automatic central lubrication system
3.Hydraulic unit
4.Collet
5.Fully sealed protective enclosure
6.chip bucket
Optional configuration:
1.Automatic bar feeder
2.Automatic bar receiver
3.Automatic chip conveyor&chip bucket
4.Hydraulic chuck
5.Automatically opening and closing door
6.Electric cabinet coolant system